Bingo MIG alurinmorin ẹrọ
Wo Wa Ni Iṣe!
Alurinmorin Performance
Nikan Išẹ to dara ti alurinmorin ni ipinnu wa
Olokiki Awoṣe Awọn wọnyi
Orisun agbara alurinmorin MIG, Afọwọṣe&Robot awoṣe, Ṣe atilẹyin ilana ilana ibaraẹnisọrọ oriṣiriṣi
Polusi MIG / MAG 350/500IX
Inverted Mono-pulse MIG/MAG Gas Shielded alurinmorin Machine
MIG / MAG Constant Foliteji MIG / MAG igbiyanju Awọn iṣẹ:
Impulse MIG / MAG, gbogboogbo MIG / MAG.
Ile-iṣẹ ohun elo:
Reluwe iyara to gaju, ọkọ oju omi titẹ, iṣakojọpọ mọto ayọkẹlẹ, ọkọ oju-omi kekere, foliteji gigayipada ati aaye pipin.
Awọn ẹya:
◆CPU + DSP ni kikun oni ga-konge iṣakoso eto gbọgán išakoso awọn igbi ati ki o mọ awọn pipe orilede ti ọkan droplet fun pulse, pẹlu awọn aaki idurosinsin ti alurinmorin, kekere spatter, ti o dara irisi weld ati ki o ga alurinmorin didara;
◆Itumọ ti ni alurinmorin database iwé pẹlu awọn kongẹ paramita ti alurinmorin Iṣakoso igbi, awọn sile ninu awọn alurinmorin ilana ati awọn aaki idaṣẹ ati bomole sile.O rọrun lati ṣatunṣe awọn paramita ati ibaamu laifọwọyi pẹlu awọn aye to dara julọ;
◆ Iṣatunṣe iṣọkan / lọtọ jẹ rọrun lati pade awọn isesi lilo oriṣiriṣi;
◆ Awọn ipo iṣiṣẹ mẹrin ti igbese-meji, mẹrin-igbesẹ, pataki mẹrin-igbese ati awọn alurinmorin iranran tẹlẹ.Ni alurinmorin ti o tobisipesifikesonu gun alurinmorin seams, awọn mẹrin-igbese tabi pataki mẹrin-igbese iṣẹ din laala agbara ti weldersati ki o se awọn didara ti alurinmorin isẹpo;
◆O nyara pàdé awọn olumulo 'aini fun pataki alurinmorin ilana.Ilana iṣakoso oni-nọmba ni kikun le ni irọrun pade awọn iwulo pataki nipasẹ iyipada ati imudara sọfitiwia, laisi iyipada ohun elo;
Imọ paramita
| Awoṣe | Polusi MIG-350IX | Polusi MIG-500IX |
| Ti won won input foliteji / igbohunsafẹfẹ | Ipele mẹta-mẹta380V (+/-) 10% 50Hz | |
| Agbara titẹ sii (KVA) | 17.1 | 27.6 |
| Iṣagbewọle lọwọlọwọ (A) | 26 | 42 |
| Foliteji igbejade ti a ṣe iwọn (V) | 31.5 | 39 |
| Iduroṣinṣin fifuye (%) | 100 | 100 |
| Ijade foliteji ti kii ṣe fifuye (V) | 85 | 85 |
| Iwajade ibiti o wa lọwọlọwọ (A) | 20-350 | 20-500 |
| Iwọn foliteji ti njade (V) | 14-40 | 14-50 |
| Opin waya alurinmorin (mm) | 0.8,1.0,1.2 | 0.8,1.0,1.2,1.6 |
| Welding waya iru | Awọn abuda Pulse Rin erogba, irin / erogba, irin pẹlu kemikali mojuto, irin alagbara, irin alagbara / irin alagbara, irin pẹlu kemikali mojuto, Ejò ati Ejò alloy | |
| Ibakan foliteji ti iwa CO2 erogba, irin, erogba, irin, erogba, irin pẹlu kemikali mojuto alagbara, irin ri to / alagbara, irin pẹlu kemikali mojuto, Ejò ati Ejò alloy | ||
| Waya ono iru | Titari / Titari-fa | |
| Ṣiṣan gaasi (L/min) | 15-20 | |
| Ipo itutu | Omi itutu / Air itutu | |
| Ikarahun Idaabobo ite | IP21S | |
| Ipele idabobo | H/B | |
Pulse MIG/MAG350/500II
Inverted meji polusi MIG/MAG gaasi shield alurinmorin ẹrọ
MMA CAC-A MIG/MAG
Afọwọṣe opolo Gouging Impulse
alurinmorin aaki
MIG/MAG TIG
Ibakan Constant
foliteji Lọwọlọwọ DC / AC
Awọn iṣẹ:
Impulse MIG/MAG, MIG/MAG gbogbogbo ， alurinmorin irin-arc Afowoyi, gbigbe arc lilu TIG ati gouging.
Ile-iṣẹ ohun elo:
Reluwe iyara to gaju, ọkọ oju-omi titẹ, iṣakojọpọ mọto ayọkẹlẹ, ọkọ oju-omi kekere, iyipada foliteji giga ati pipin aaye.
Awọn ẹya:
◆CPU + DSP ni kikun oni ga-konge iṣakoso eto gbọgán išakoso awọn igbi ati ki o mọ awọn pipe orilede ti ọkan droplet fun pulse, pẹlu awọn aaki idurosinsin ti alurinmorin, kekere spatter, ti o dara irisi weld ati ki o ga alurinmorin didara;
◆Itumọ ti ni alurinmorin database iwé pẹlu awọn kongẹ paramita ti alurinmorin Iṣakoso igbi, awọn sile ninu awọn alurinmorin ilana ati awọn aaki idaṣẹ ati bomole sile.O rọrun lati ṣatunṣe awọn paramita ati ibaamu laifọwọyi pẹlu awọn aye to dara julọ;
◆Iṣakoso Sipiyu oni-nọmba ni kikun eto iṣakoso iwọn to gaju ti ifunni okun waya ati wiwakọ-meji ati ẹrọ iṣakoso oni-nọmba kikun-meji ti ifunni okun waya pẹlu encoder rii daju ifunni okun waya iduroṣinṣin nigbati ẹru ifunni okun waya yipada tabi foliteji net fluctuates ninu awọn ilana ti alurinmorin;
◆ Iṣatunṣe iṣọkan / lọtọ jẹ rọrun lati pade awọn isesi lilo oriṣiriṣi;
◆O ni awọn ipo iṣiṣẹ mẹrin ti igbese-meji, igbesẹ mẹrin, igbesẹ mẹrin pataki ati alurinmorin iranran.Ni alurinmorin ti o tobi sipesifikesonu gun alurinmorin seams, awọn mẹrin-igbese tabi pataki mẹrin-igbese iṣẹ din laala agbara ti welders ati ki o mu awọn didara ti alurinmorin isẹpo;
◆O nyara pàdé awọn olumulo 'aini fun pataki alurinmorin ilana.Ilana iṣakoso oni-nọmba ni kikun le ni irọrun pade awọn iwulo pataki nipasẹ iyipada ati imudara sọfitiwia, laisi iyipada ohun elo;
Imọ paramita
| Awoṣe | Polusi MIG-350II | Polusi MIG-500II |
| Ti won won input foliteji / igbohunsafẹfẹ | Ipele mẹta-mẹta380V (+/-) 10% 50Hz | |
| Agbara titẹ sii (KVA) | 17.1 | 27.6 |
| Iṣagbewọle lọwọlọwọ (A) | 26 | 42 |
| Foliteji igbejade ti a ṣe iwọn (V) | 31.5 | 39 |
| Iduroṣinṣin fifuye (%) | 60 | 60 |
| Ijade foliteji ti kii ṣe fifuye (V) | 85 | 85 |
| Iwajade ibiti o wa lọwọlọwọ (A) | 20-350 | 20-500 |
| Iwọn foliteji ti njade (V) | 14-40 | 14-50 |
| Opin waya alurinmorin (mm) | 0.8,1.0,1.2 | 0.8, 1.0, 1.2, 1.6, 2.0 |
| Welding waya iru | Pulse abuda ri to erogba, irin / erogba, irin pẹlu kemikali mojuto, irin alagbara, irin ri to / alagbara, irin pẹlu kemikali mojuto Al-Mg alloy, funfun aluminiomu ati Al-Si alloy, Ejò ati Ejò alloy | |
| Ibakan foliteji ti iwa CO2 erogba, irin, erogba, irin, erogba, irin pẹlu kemikali mojuto | ||
| Waya ono iru | Titari / Titari-fa | |
| Ṣiṣan gaasi (L/min) | 15-20 | |
| Ipo itutu | Omi itutu / Air itutu | |
| Ikarahun Idaabobo ite | IP21S | |
| Ipele idabobo | H/B | |
MIG -M350/500/630
Iyipada CO2 gaasi idabobo ẹrọ alurinmorin
MIG/MAG
Ibakan
foliteji
Awọn iṣẹ:
MIG/MAG gaasi idabobo ẹrọ alurinmorin, afọwọṣe irin-arc alurinmorin.
Ile-iṣẹ ohun elo:
Gbigbe ọkọ, eiyan, ẹrọ imọ-ẹrọ, ile-iṣẹ petrochemical ati ọna irin.
Awọn ẹya:
◆O ni aaki iduroṣinṣin ti alurinmorin, spatter kekere, irisi ti o dara ti weld ati didara alurinmorin giga;O ni awọn aye pipe ti iṣakoso igbi alurinmorin, awọn paramita ninu ilana alurinmorin ati idaṣẹ arc ati awọn aye idinku.O rọrun lati ṣatunṣe awọn paramita ati ibaamu laifọwọyi pẹlu awọn aye to dara julọ;
◆ Awọn olumulo le fipamọ ara wọn.Awọn aye asọye ti ilana alurinmorin ati ṣakoso ilana alurinmorin ati pese irọrun fun alurinmorin oriṣiriṣi ti ibudo kanna nipasẹ iranti ati lilo awọn aye ti ilana alurinmorin;
Awọn paramita ti ẹkọ
| Awoṣe | MIG- 350M | MIG- 500M | MIG-630M |
| Ti won won input foliteji / igbohunsafẹfẹ | Mẹta -phase380V (+/-) 10% 50Hz | ||
| Agbara igbewọle ti a ṣe iwọn (KVA) | 16.5 | 27.6 | 36 |
| Iṣagbewọle lọwọlọwọ (A) | 25 | 42 | 54 |
| Foliteji igbejade ti a ṣe iwọn (V) | 31.5 | 39 | 44 |
| Iduroṣinṣin fifuye (%) | 100 | 100 | 60 |
| Ijade foliteji ti kii ṣe fifuye (V) | 68 | 68 | 86 |
| Iwajade ibiti o wa lọwọlọwọ (A) | 60-350 | 60-500 | 60-630 |
| Iwọn foliteji ti njade (V) | 15-40 | 15-50 | 15-50 |
| Opin waya alurinmorin (mm) | 0.8,1.0,1.2 | 1.0,1.2,1.6 | 1.0,1.2,1.6 |
| Waya ono iru | Ti | ||
| Alurinmorin ibon ipo itutu | Itutu omi / Afẹfẹ itutu agbaiye | ||
| Ikarahun Idaabobo ite | IP21S | ||
| Ipele idabobo | H/B | ||
ARC315/400/500/630/1000/1250/1500
Inverted DC aaki welder
MMA
Afọwọṣe opolo
alurinmorin aaki
CAC-A
Gouging
Awọn iṣẹ:
Ọwọ irin-aaki alurinmorin.
Awọn irin weldable:
Erogba irin ati simẹnti irin.
Awọn ẹya:
◆ Awọn iṣakoso nronu ni o ni a ti aipe oniru ati oni àpapọ, ati awọn
alurinmorin lọwọlọwọ le wa ni titunse gbọgán;
◆Aaki idaṣẹ lọwọlọwọ le ti wa ni titunse lọtọ, ati awọn ti o ni ohun
iṣẹ idaṣẹ arc ti o dara julọ;
◆ Awọn aaki titari lọwọlọwọ le ti wa ni titunse lọtọ;
◆ O ni awọn iṣẹ aabo aabo bi aabo iwọn otutu,
lori-lọwọlọwọ Idaabobo ati kukuru-Circuit Idaabobo.
Ilana Ilana
| Awoṣe | ARC-315 | ARC-400 | ARC-500 | ARC-630 | ARC-1000 | ARC-1500 |
| Ti won won input foliteji / igbohunsafẹfẹ | Ipele mẹta-mẹta380V (+/-) 10% 50Hz | |||||
| Agbara titẹ sii (KVA) | 11.2 | 18.4 | 25 | 31.6 | 55 | 89 |
| Iṣagbewọle lọwọlọwọ (A) | 17 | 28 | 38 | 52 | 83 | 140 |
| Foliteji igbejade ti a ṣe iwọn (V) | 32.6 | 36 | 40 | 44 | 60 | 70 |
| Iduroṣinṣin fifuye (%) | 60 | |||||
| Ijade foliteji ti kii ṣe fifuye (V) | 70 | 70 | 81 | 86 | 86 | 86 |
| Iwajade ibiti o wa lọwọlọwọ (A) | 30-315 | 40-400 | 50-500 | 63-630 | 63 ~ 1000 | 63-1500 |
| Ikarahun Idaabobo ite | IP21S | |||||
| Ipele idabobo | H/B | |||||
| itutu mode | Itutu afẹfẹ | |||||
AWA ELEDA
BINGOcontinuously iwadi ati ki o ndagbaimo alurinmorin oyejẹ ki diẹ alurinmorin ẹrọlọ agbaye
A NI IFERAN
Bayi o ti ni ipa ati ojurerenipasẹ ọpọlọpọ awọn orilẹ-edeni ojo iwaju
A DIFA FUN OLOHUN
A yoo nawo awọn orisun diẹ sii nilemọlemọfún r & d ati gbóògìlọ siwajuma duro
